Faceted nut bowl with shell well
₹449MRP ₹59925% off
Available in 3 colours
1 / 4
Dry fruit bowl with shell well
₹999MRP ₹1,49933% off
Inclusive of all taxes
Size
24.13 × 24.13 × 8.89 cm (W × D × H)Delivery
Dispatched in 3–5 working days, then usually 2–6 days to reach you
An estimate: every piece is printed after you order. Ships anywhere in India. Shipping cost is shown at checkout, before you pay.
- Printed to orderMade in our studio after you order
- Secure paymentUPI, cards, netbanking
- Damaged in transit?Reprinted or refunded in full
- Size
- 24.13 × 24.13 × 8.89 cm
- Weight
- 472 g
- Material
- PLA
About this piece
Description
A two-part serving bowl for nuts and dry fruit. The white tray lifts out of the fluted outer bowl and divides the top into three wedges — almonds, cashews, pistachios — around a deep well at the centre. The well is for the shells. They go in as you eat, instead of piling up on the table or going back into the bowl with the good ones. The two parts come apart to be emptied and washed. 9.5 inches across — a coffee-table bowl for a full house, or a dry-fruit tray for Diwali. Printed in PLA, with the outer bowl in beige or black.
Size & material
24.13 × 24.13 × 8.89 cm
Width × depth × height, measured off the finished piece.
- Weight
- 472 g
- Material
- PLA, a plant-based plastic
Shipping & returns
- Printed after you order and dispatched in 3–5 working days, then usually 2–6 days to reach you, anywhere in India.
- Shipping is a flat ₹100 per order, added at checkout before you pay.
- Damaged or faulty on arrival? Tell us within 48 hours and we will reprint it or refund you in full.
- Each piece is printed for you, so we cannot take it back for a change of mind. Read our returns policy and shipping policy.
Product information
- Commodity
- Serving bowl
- Net quantity
- 472 g
- Country of origin
- India
- Marketed by
- CornerPeace
- Consumer care
- support@cornerpeace.in
Our returns policy and delivery times apply to every order.
What to expect from a 3D print
Fine layer lines
Every piece is printed 0.2 mm at a time, so up close you will see fine lines across the surface. That is how a 3D print looks.
Slight colour variation
Filament shades can vary a little from spool to spool, so your piece may be a touch lighter or darker than the photos.
- −25%
- −28%
Pistachio bowl with shell well
₹249
MRP ₹34928% offAvailable in 2 colours
- −22%
Banana fruit bowl
from₹699
MRP ₹89922% offAvailable in Bahama Yellow